Scored
a Superchips Flashpaq! |
||
 |
 |
|
 |
 |
|
Simple Steps to Use: |
||
1) You need to marry it
to your truck before you can do anything with it! If you try anything
you will get an error so do this first: |
||
| a. Plug in the Flashpaq (Pic 2) | ||
| b. Select - Perfomance Tuning - Read Vehicle - Read Vehicle ID (it will go and read a few codes and report them back.) | ||
| c. Select - Performace Tuning - Read Vehicle - Read Stock (This takes a bit and saves stock maps so you can revert to stock when needed - note: it will ask you to turn off the truck and back on before saving stock File 2 so don't worry) After this you are ready to make all your changes and can use it as normal! | ||
| For some reason the above wasn't in the instructions | ||
 |
||
